4
Cable and Ring Attachment
(VX-5 and VX-7)
First, place the cable loop over any leg of the base. This will
prevent the ring from freely swinging when hit by a ball.
Second, insert the white cable into the ring. The pressed
fitting should rest against the ring.
Setting Ring Height
Third, insert the cable into the interlocking holes on the frame.
Begin by going up into the first hole and then down through
the other before placing the excess cable into the tubing. The
black
mark on each cable represents our suggested height of
the ring during front toss training.
*Always place the tube side away from the batter
to prevent damage to the tube.
Thank you for choosing V-Flex…
