backlight on the display panel. Press the "Enter" key to enter the setting. Press
the "UP" or "DOWN" key to switch the LCD backlight, select "Yes" "Means that
the LCD backlight is always on and will not be turned off. Selecting "NO"
means it will be turned off after 20 seconds without any key operation until it is
turned on again when there is a key operation. After selecting the settings,
press "Enter" to save and exit.
Invert Word:
Inverted font
English/Chinese: Chinese to English conversion
LCD Backlight
：
on LCD Backlight on setting
此选项是对显示板液晶字体倒向、中英文显示和背光灯进行设置，按
“Enter”
键可
进入设置，液晶背光灯按
“UP”
键或者
“DOWN”
键可进行开关选择，选择
“Yes”
表
示液晶背光灯一直长亮
,
不关断，选择
“NO”
表示没有按键操作连续
20
秒后关断
,
直到有按键操作时重新开启。选好设置后按
“Enter”
保存退出。
Invert Word
：
字体倒向
English/Chinese:
中英文转换
LCD Backlight on
：
液晶背光灯开启设置
5.Manual Set(
手动模式设置
)
This option is to set the scene parameters of the lamp body, press the "Enter"
key to enter the save, and online operation can be carried out, provided that
the lamp body's operating mode (Run Mode) is set to manul, that is, the
manual mode is valid. , The next startup can restore the previous startup state.
PAN:
X axis position
PANMICO: X-axis fine adjustment
TILT:
Y axis position
TILTMICO: Y-axis fine adjustment
ZOOM:
focus position
DIM:
Total dimming
STROBE:
Strobe
DIM_R:
Red dimming
DIM_G:
Green dimming
DIM_B:
Blue dimming
DIM_W:
White dimming
此选项是对灯体场景参数进行设置，按
“Enter”
键可进入保存，可进行联机运行，
前提灯体的工作模式（
Run Mode
）要设置为
manul,
也就是手动模式才有效，断
电后，下一次开机可恢复前一次开机状态。
PAN
X
轴位置
PANMICO
X
轴微调
TILT
Y
轴位置
TILTMICO
Y
轴微调
ZOOM
调焦位置
DIM
总调光
STROBE
频闪
DIM_R
红色调光
Summary of Contents for BWZ3715
Page 10: ...ABS XY 10000 2500K 36 48 1 6 RGBW 7 Dimensions...
Page 28: ......
