HOW TO DECODE
OPERATION
TROUBLE SHOOTING
•
Press the manual ON/OFF button for 5 seconds until the red LED flashes once per second to
confirm de-coding is successful.
•
Press the ALL OFF switch on the Remote Control for more than 3 seconds, the LED flashes once
per second to confirm decoding is successful.
•
Plug your appliance(s) into the Remote Socket(s)
•
Press the programmed ON or OFF button on the Remote Control to control the Remote Socket.
•
The Remote Sockets can also be operated manually using its ON/OFF Button
If a Remote Socket does not react to the Remote Control please check the following:
•
Low battery in the Remote Control
•
Distance too large between the remote control and the receiver (ensure the range distance is no
more than 20 clear Metres) and free from obstacle that may reduce the distance.
•
If programming has not been successful, turn the power off and back on then follow the pro-
gramming steps above.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT PLEASE REACH OUT TO US AT SUPPORT@VTACEXPORTS.COM
V-TAC HOUSE, KELPATRICK ROAD, SLOUGH, BERKSHIRE, SL1 6BW, UK.
