LED SOLAR BOLLARD LIGHT
1. Installation must be performed by a qualified electrician
2. Keep away from the fire.
3. Don't immerse in the water
4. This is a solar powered lamp, please install it in a location where can get efficient sunlight.
5. Please note the lighting time depends on sunshine duration & weather & working mode.
6. Built-in intelligent system is with over-charge, over-discharge and over-voltage protection, safe
and durable.
7. When the lamp is turned off, it can still get solar charging.
8. The lamp is equipped with an internal battery pack, which is replaceable. If any need, please
contact the seller for correct new battery pack.
9. Non-professionals please do not disassemble the lamp.
10. Please do not dispose the battery with household garbage to avoid explosion.
This marking indicates that this
product should not be disposed
of with other household wastes.
FEATURES
PARTS INCLUDED
INSTALLATION DIAGRAM
B. INSTALLATION INSTRUCTIONS
A. INSTALLATION INSTRUCTIONS
TECHNICAL DATA:
Expansion Screw (4Pcs)
360° So� Ligh�ng
Auto On/Off
IP65 Waterproof
Two Op�onal
Ligh�ng Modes
Long Ligh�ng
Time
Ba�ery Replacement
Double-side
Solar Panel
Cordless to
Install
Mo�on
Detec�ve
Solar Light (1Pc)
Spike (1Pc)
Protec�on Cap (4Pcs)
User Manual (1Pc)
INTRODUCTION & WARRANTY
WARNING
INSTALLATION INSTRUCTION
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installation and keep this manual handy for future reference.
If you have any another query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best. The warranty is valid for
3 years from the date of purchase. The warranty does not apply to damage caused by incorrect
installation or abnormal wear and tear. The company gives no warranty against damage to any
surface due to incorrect removal and installation of the product. This product is warranted for manu-
facturing defects only.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in
multiple languages.
3
YEA
RS
WARRANTY
*
IP65
RATING
Model
VT-945
Wa�s
5W
Lumens
400LM
LED Chip Type
SMD2835
Li-ion Ba�ery
18650/2000mAh/3.7V
/7.4Wh, Replaceable
6W/DC 5.5V, double-side
Mono with Tempered Glass
Solar Panel
Working Modes
Two op�onal working modes
Charging Time
12-15 hrs to fully charge
Ligh�ng Time
Sensor Mode: 4 night+
PIR Detec�on Angle
Keep Ligh�ng Mode: 2 night+
120°/
<
7 Meters
Dimension
705.7x155mm
1. Loose the screws, then open the battery cover
2. Diassemble the connector and take out the battery.
3. Put the new battery in the box and connect it well with connector
4. Lock the cover well
TWO WORKING MODES
HOW TO REPLACE BATTERY
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
Please press the buttons to adjust working mode:
1. Press ON-OFF Button 1st time, the lamp is turned on and
work in Mode A, which is default working mode.
2. Then press the Function Button, the lamp enter Mode B.
3. Press the ON-OFF Button again, the lamp turns off.
Installation A: Built-in Soft Lawn
Installation B: Built-on Concrete Ground
1. Prepare lamp, accessories and tools well firstly.
2. Use screwdriver to open the ON-OFF button cover plate in the back of the lamp, press the buttons
to turn on the lamp and select desired working mode, then lock the ON-OFF button cover plate.
3. Insert the spike into the lawn, then fix the lamp onto the spike tightly.
1. Prepare lamp, accessories and tools well firstly.
2. Use screwdriver to open the ON-OFF button cover plate in the back of the lamp, press the buttons
to turn on the lamp and select desired working mode, then lock the ON-OFF button cover plate.
3. Drill four holes on the flat concrete ground and fix the lamp on the ground with expansion screws,
then put the protection cap to cover on the expansion screws.
Mode A (Default Working Mode)
Lamp will automatically lights up at night and turns to full brightness (400lm) when motion is
detected in the range < 7meters and then turns to lower brightness in 20 seconds of no motion.
Mode B
Lamp will automatically lights up at night and keep 50% brightness, after 5 hours or when battery
power is less than 30%, lamp turns to Mode A.
After 5 hours working or when
battery power is less than 30%
ENGLISH
ENGLISH
ENGLISH
ENGLISH
