V-Tec DT607C Series, User Manual

-7-

SETUP INSTRUCTIONS

Setting Nameplate Illumination Mode 

There are 3 illumination modes for nameplate indicator, 

Normally on

,

Normally off 

and

 Auto

. 

Normally on is default, to change the setting, please follow the steps:

UNLOCK Indicator:ON
TALK Indicator:OFF

Buzzer

Beep+, Beep

In standby mode, press 

KEY_SET

 button 

three 

times

.

UNLOCK Indicator:ON
TALK Indicator:OFF

Buzzer

Beep+

Press 

KEY_3 

button to set 

the nameplate illumination 

mode to

 Normally on

.

UNLOCK Indicator:ON
TALK Indicator:OFF

Buzzer

Beep, Beep

Press 

KEY_3 

button again

to set the nameplate illumina-

tion mode to

 Normally off

.

UNLOCK Indicator:ON
TALK Indicator:OFF

Buzzer

Beep, Beep,Beep

Press 

KEY_3 

button again 

and again to set the nameplate 

illumination mode to

 Auto

.

Press 

KEY_3

• 

If setting mode has not been exited, you can change the nameplate illumination mode by pressing KEY3 

circularly.

• 

The 

LED_NAME

 indicator will blink all the time until exit out the setting mode.

• 

If without any operation in 10 seconds, it will exit out setting mode automatically.

• 

In this step,press 

KEY_SET

 button twice to exit out the setting mode manually.

Setting Night View LED Illumination Mode

There are 3 working modes for night view LED indicator, 

Normally on

,

Normally off 

and

 Auto

. 

Auto is default, to change the setting, please follow the steps:

UNLOCK Indicator:ON
TALK Indicator:OFF

Buzzer

Beep+, Beep

In standby mode, press 

KEY_SET

 button 

three 

times

.

UNLOCK Indicator:ON
TALK Indicator:OFF

Buzzer

Beep+

Press 

KEY_4 

button to set 

the night view LED mode 

to

 Normally on

.

UNLOCK Indicator:ON
TALK Indicator:OFF

Buzzer

Beep, Beep

Press 

KEY_4 

button again

to set the night view LED 

mode to

 Normally off

.

UNLOCK Indicator:ON
TALK Indicator:OFF

Buzzer

Beep, Beep,Beep

Press 

KEY_4 

button again

and again to set the night 

view LED mode to

 Auto

.

Press 

KEY_4

• 

If setting mode has not been exited, you can change the night view LED illumination mode by pressing 

KEY4 circularly.

• 

The 

LED_NAME

 indicator will blink all the time until exit out the setting mode.

• 

If without any operation in 10 seconds, it will exit out setting mode automatically.

• 

In this step,press 

KEY_SET

 button twice to exit out the setting mode manually.