Operator Requirements
D292105.2a.fm
vii
Operator Requirements
The guidelines provided in the following pages are intended to educate the user about how to
operate the TM-402 safely. They contain important information on avoiding potential hazards to
the operator and to the equipment. Only personnel who have thoroughly reviewed and under-
stand the
TM-402 User’s Guide
and are aware of the possible hazards should operate or perform
maintenance on the TM-402.
Operators and maintenance personnel are advised not to wear loose fitting clothing or jewelry
when operating or maintaining the TM-402. Protective eye wear should be worn when loading,
operating or maintaining the TM-402.
Caution:
Users should always wear protective eye wear when loading, operat-
ing or maintaining the TM-402.
Safe operation of the TM-402 does not require gloves of any type, however some component
manufacturers may recommend gloves be worn when handling parts. Consult the component
manufacturer for specific placement instructions. Ear protection is not necessary during normal
operation.
When running the TM-402, the operator should stand or sit in front of the touch screen to assure
easy access to all controls and the
Power/Emergency Stop Button
. This position allows the oper-
ator to view all parts of the TM-402 while it is in operation. When loading the TM-402 Bowl
Feeder or changing Taper reels, the operator may also need to access the side and back of the
machine
Caution!
The TM-402 should never be operated while under the influence of alcohol or drugs.
V-TEK® Incorporated takes no responsibility for the safety of TM-402 if it is used for
any purpose other than the intended purpose as specified in this User’s Guide.
Work Area
