1-6
TM-403 User’s Guide
Assembling the TM-402
D292105.4a.fm
Assembling the TM-402
Equipment Required
• Adjustable wrench (needs to fit 1 1/16” to 1 3/32” nut)
• Standard and Metric Hex Wrench Sets (provided with machine)
• 85-110 PSI air pressure system
Note:
Read the
TM-402 User’s Guide
before assembling the TM-402.
Unpack the TM-402 Crate
1.
Move the Crate to the Work Area.
Use a fork lift to move the TM-402 crate to the pre-
pared work area. Ensure the fork is centered under the crate before lifting.
Note:
Use a forklift with a minimum load capacity of
300 pounds (136 kg) and a fork
length that is a minimum of
40 inches (102 cm) so the fork fully extends beyond the crate
on the other side. The forklift should only be operated by a licensed/certified operator.
2,
Unpack the Crate.
a.
Remove the top and sides from the TM-402 crate. Set aside.
b.
The TM-402 is shipped partially disassembled, with the
Bowl Feeder, Take-up Arm
and
Carrier Tape/Feed Arm
detached and wrapped in bubble wrap. Remove the smaller
items one at a time from the crate and place on a flat, stable surface for assembly.
c.
Remove and discard the protective wrapping from each part.
