D292105.4a.fm
Assembling the TM-402
Chapter 1: Assembly & Installation
1- 9
b.
The
Carrier Tape Arm
has a dowel pin which locks into position holes on the
Track
Support Bracket
. Slide the
Carrier Tape Arm
onto the threaded rod, engage the dowel pin
into the desired position, and secure it into place with the black knob.
4.
Positioning the Take-up Arm
a.
The
Take-up Arm
has a dowel pin which
locks into position holes on the
Track Sup-
port Bracket
. Loosen the black knob on the
back of the
Take-up Arm
and position it at
about a 45 degree angle from the baseplate
assembly. Engage the dowel pin into the
desired position and secure it into place with
the black knob..
b.
Plug the electrical connector into the
take-up motor receptacle.
Position Holes
Knob
