Versacount II+ Quick Start Guide
D291720.2a
Page
1
of
2
Rev.
1,
4/25/17
This quick start guide provides basic setup and operating instructions for the Versacount II+. The intended use of
the Versacount II+
is to count taped reels of individually sealed Surface Mounted Devices (SMD) or Radial/Axial
components. Use of this equipment in any other way is not recommended.
Work Area:
The Versacount II+ is designed to be operated in a temperature-controlled, light industrial setting.
Install the machine on a flat, dry, stable surface in a well-lit area. Choose a table that is at least 36
”
wide by 18”
deep to provide sufficient space for the assembled machine.
See page 2 for Quick Start Instructions.
1.
Take-up Reel Arms
2.
Emergency Stop/Start Button
3.
Tape Reels
4.
Tape Adjuster Guide
5.
Idler Wheel
6.
LED Display & Keypad
Physical Specifications
Height:
13 inches (33 cm)
Depth:
11.5 inches (29 cm)
Width:
36 inches (92 cm)
Weight:
26 pounds (12 kg)
Operating Environment
Operating Temperature
: 0°C - 50°C (32°F - 122°F)
Maximum Humidity:
90%
non
‐
condensing
Power Required:
120/230 VAC, 50-60 Hz
Only qualified personnel with the proper technical training, experience working on
this type of equipment and awareness of the possible hazards should perform
maintenance on the Versacount II+.
The user is protected from moving parts and exposure to objects being ejected
under pressure by a metal enclosure. The Versacount II+ should never be operated
with the enclosure removed. There are no internal parts that can be serviced by the
user.
Disconnect the machine from the power supply, placing the unplugged cable in clear
view before performing maintenance.
Always connect the power cord to the machine before plugging it into an outlet.
Detailed User’s Guides which include maintenance instructions, spare parts lists and troubleshooting information
are available on the V-TEK, Inc. website:
www.vtekusa.com.
Contact Information
V-TEK, Inc.
751 Summit Ave
Mankato, MN 56001
TEL:
(507) 387-2039
website:
http://www.vtekusa.com
email:
service@vtekusa.com
