RAPID-VSC-DEM
Instructions - user maintenance manual
-
©02/20 Rev:1.0
/TRANSLATION OF THE ORIGINAL
INSTRUCTIONS
Page 13
CHAPTER 2 - G
ENERAL MACHINE DESCRIPTION
The RAPID-VSC-DEM HOT, hot water pressure washer referred to in this manual is primarily designed to pump water at a
pressure of 200 bar.
The hot water pressure washer is intended exclusively for cleaning and washing with hot or cold water of objects or surfaces
that are suitable for mechanical treatment by the high-pressure water jet and the possible chemical action of detergents.
In the case of hot water cleaning, the water is heated inside a boiler equipped with heating coils, thanks to a burner fed by
diesel oil.
The water pressure is provided by a piston pump driven by an endothermic, diesel-powered engine.
The cleaning agents to be used must be liquid-based and not powdered and must be biodegradable, in accordance with
current regulations.
A
TTENTION
During operation, no-one other than the operators in charge must stand near the machine or, worse still,
intervene on it.
The protections have been designed by the manufacturer in order to safeguard the safety of the operators
while carrying out their tasks. During operation, the guards must not be removed for any reason.