RAPID-VSC-DEM
Instructions - user maintenance manual
-
©02/20 Rev:1.0
/TRANSLATION OF THE ORIGINAL
INSTRUCTIONS
Page 29
CHAPTER 11 - C
ONTROL PARTS
11.1 C
ONTROL STATION
The control station is the place where the operator must be to manage the work cycle and supervise the machine's
operation.
The machine is equipped with:
▪
N
O
.
1
COMMAND AND CONTROL PANEL
(
A
), on which the machine's parameters and work programmes can be set;
Key:
A.
Pump engine starter key switch (in)
B.
Burner ignition switch (br)
C.
Adjusting the burner outlet water temperature (tr)
SIGNALLING ANOMALIES
o
presence of voltage (A1)
o
lack of engine oil(A2)
o
battery operation indicator light( A3)
A
TTENTION
During operation, no-one other than the operators in charge must stand near the machine or, worse still,
intervene on it.
A1
A2
A3
B br
C tr
A in
