RAPID-VSC-DEM
Instructions - user maintenance manual
-
©02/20 Rev:1.0
/TRANSLATION OF THE ORIGINAL
INSTRUCTIONS
Page 32
CHAPTER 13 - USE
OF
THE
MACHINE
13.1 D
ESCRIPTION OF THE OPERATING CYCLE
13.1.1
C
OLD WATER OPERATION
1.
Place the battery in the corresponding compartment and connect blue terminal = negative pole (symbol - on the
battery), red terminal = positive pole ( on the battery)
2.
Once the battery is connected, place the ignition key in the vertical position, the green power indicator light will
illuminate, this indicates the presence of voltage inside the machine.
3.
Open the water supply tap (2).
4.
Turn the key clockwise to start the engine.
5.
VERY IMPORTANT:
In the event of a complete lack of diesel fuel or
initial start-up
, it is necessary to continue to
start the ignition with the key and at the same time act on the lever located directly on the engine for
manual
diesel fuel
pumping;
6. Act on the gun lever (
3
) to obtain water delivery from the wand (4).
