RAPID-VSC-DEM
Instructions - user maintenance manual
-
©02/20 Rev:1.0
/TRANSLATION OF THE ORIGINAL
INSTRUCTIONS
Page 36
13.2 C
ONTRAINDICATIONS TO USING THE MACHINE
Full compliance with the Machinery Directive 2006/42 EC and the efforts made by our engineers during the design phase
have resulted in a machine that can be placed at the highest safety level for its category. Each of the mechanical, electronic,
control, etc. parts, devices or arrangements with which the machine is equipped has been designed taking into account all
possible risks that could potentially arise.
Wherever possible, using the best technological resources available today, these risks have been eliminated by applying
appropriate protection or technical measures.
Furthermore, in order to avoid machine malfunctions and further risks of injury, it is recommended that the following
provisions be scrupulously observed:
•
Do not use the machine for purposes other than those for which it has been built
•
The machine must be stopped normally using the controls on the panel.
•
Do not approach the machine with explosive or flammable materials.
•
Do not operate the machine while wearing loose clothing or objects such as scarves, necklaces, ties, etc., which may
become entangled or close to potentially hot surfaces
•
The protections provided by the manufacturer have been designed to protect the safety of the operator and it is therefore
recommended not to tamper with or remove them for any reason.
A
TTENTION
The operations described in this chapter must be carried out
ONLY
by qualified and authorised personnel.
The use of protective equipment is
MANDATORY
during the operations described in this section.
