RAPID-VSC-DEM
Instructions - user maintenance manual
-
©02/20 Rev:1.0
/TRANSLATION OF THE ORIGINAL
INSTRUCTIONS
Page 46
CHAPTER 19 - SUMMARY
OF
THE
MAIN
WARNINGS
•
The safety devices have been designed by the manufacturer to safeguard the operator's safety while performing his
tasks. The devices must not be tampered with under any circumstances during operation.
•
Work on the switchboard may only be carried out by qualified electricians.
•
Never run the machine with no load.
•
During operation, when the machine is running, its surfaces are at high temperature, they
must never be touched with
bare hands!!!.
•
Never direct the water jet at yourself or other people: the jet may be at high pressure and cause serious injury
•
It is absolutely forbidden, during machine operation, to remove or tamper with the protective covers provided by the
manufacturer in order to safeguard the operator's safety.
CHAPTER 20 - SPARE
PARTS
20.1 O
RDERING RULES
The various components of the machine can be obtained from your local dealer. Insert in the
request:
−
Model and serial number of the machine.
These data are printed on the identification plate of each
machine
−
The
code number of the required
part can be found in the spare parts catalogue available from your
local dealer.
−
Description of the part and quantity required.
Please note that the manufacturer is always available for any assistance and/or spare parts.
