6 User settings
Aborting a programme through button selection
With the appliance door closed, carry out the following step:
▸ Hold the active programme button – the indicator light illuminates – depressed and at
the same time touch the
button.
–
The programme is aborted.
5.11
End of programme
–
In the display appears:
End of programme
Clean door filter
–
The indicator light for the programme that has finished illuminates.
«Crease guard» starts if the appliance is not unloaded straightaway. When it has fin-
ished, all the displays go out.
Unloading the washing
▸ Open the appliance door or touch the
but-
ton.
–
All displays go out.
▸ Unload the laundry.
▸ Clean the door filter (see page 25).
▸ Close the appliance door.
End of the wash day
▸ Clean door filter.
▸ Check the front filter and clean if necessary (see page 27).
▸ Close the appliance door.
6
User settings
6.1
Adjusting user settings
Providing no programme is running and no error message is displayed, the user settings
can be changed with the appliance door open or closed. The procedure is generally the
same for all settings.
Changing user settings
▸ Hold the
button depressed for 5 seconds.
User settings
FN XXXXX XXXXXX
▸ Touch the
button repeatedly until the re-
quired setting appears in the display, e.g.:
Childproof lock
OFF
19
