2 Using for the first time
2.5
Interrupting the function test
The function test can be interrupted in 2 ways.
Either:
▸ Open the appliance door.
–
In the display appears:
Pause function test
Close appliance door
–
After closing the appliance door, in
the display appears:
Function test complete
Or:
▸ Touch the
button.
–
In the display appears:
Pause function test
ende
continue
The appliance can only be operated after standing in the
normal operating position
for around 2 hours.
2.6
Aborting the function test
–
In the display appears:
Pause function test
ende
continue
▸ Touch the
button.
–
In the display appears:
Function test complete
The appliance can only be operated after standing in the
normal operating position
for around 2 hours.
2.7
Where is the identification plate?
1
Identification plate with serial number (SN)
Note down the serial number (SN) of your appliance on the back page of these operat-
ing instructions.
Depending on when the appliance was manufactured, it may have a manufac-
turer’s number (FN) or serial number (SN). There is no difference between the two.
8
