7 Trouble-shooting and error messages
29
… a continuous acoustic signal is emitted,
flashes in a display and the
appliance switches off
…
and
flash alternately in the display
Possible cause
Solution
• A touch button or slider
was touched for longer
than 10 seconds.
➤
Remove object or food that has boiled over.
➤
The appliance can be used again as
normal.
• Object (e.g. pan, dish) on
the control panel.
• Food boiled over onto the
control panel.
Possible cause
Solution
• The automatic safety
shut-off was triggered.
➤
Switch the cooking zone back on again if
required.
If a cooking zone has been running for longer without any settings
being changed, the appliance switches the cooking zone off automat-
ically. It is switched off irrespective of the power level set.
Power level
1
2
3
4
5
6
7
8
9
Safety shut-off after
hrs:mins
8:30 6:30 5:30 4:30 3:30 3:00 2:30 2:00 1:30