7 Drying
If no programme selection is made within 20 seconds, all the displays go out.
However, it is still possible to make a programme selection.
7.3
Selecting a programme
«Press and go»
An automatic programme can be selected with the press of a single button. All
the necessary settings for the programme are provided automatically.
Additional functions can be selected or deselected by pressing the corres-
ponding button.
If no other button is pressed within the next 20 seconds, the programme se-
lected starts automatically.
Use the 'Programme overview' to determine which programme is the
most suitable for your washing.
Duration remaining indicator
During programme selection, the expected duration of a programme is shown.
This corresponds to a load containing similar wash items with a defined
weight.
Load determination occurs after the programme start:
•
The maximum programme duration
appears and the letter «h»
flashes for about 1 minute.
•
The expected duration remaining is calculated and then displayed.
Depending on fabric type, the actual running time may differ from the
duration shown. The duration remaining shown – especially towards
the end of the programme – can freeze for several minutes. During
this period, the letter «h» flashes and the duration remaining is recal-
culated.
•
The letter «h» flashes again: the duration remaining is recalculated and then
displayed
.
29
Summary of Contents for Adora TL WP
Page 1: ...Operating instructions Adora TL WP Tumble dryer...
Page 60: ...60 14 Notes...
Page 61: ...61...
Page 62: ...62...