Troubleshooting
en
43
Fault
Cause and troubleshooting
E:32-00 will light up
alternately or indicator
for water supply lights
up.
6.
Clean the filter.
7.
Re-insert the filter in the supply hose.
8.
Screw the water connection back on.
9.
Check the water connection for leaks.
10.
Restore the power supply.
11.
Switch the appliance on.
E:34-00 will light up
alternately.
Water is continuously running into the appliance.
1.
Turn off the water tap.
2.
Call Customer Service →
E:61-02 will light up
alternately.
Not an appliance fault. Wastewater pump is blocked
or the cover of the wastewater pump is loose.
1.
Clean the wastewater pump.
→
"Clean wastewater pump", Page 54
2.
Secure the cover of the wastewater pump so it
clicks into position.
→
"Clean wastewater pump", Page 54
E:61-03 will light up
alternately. Water is
not drained.
Not an appliance fault. Siphon connection is still
closed or the wastewater hose is kinked or blocked.
1.
Check the connection to the siphon and open if ne-
cessary.
2.
Install wastewater hose without kinks.
3.
Remove residues.
Not an appliance fault. Wastewater pump is blocked
or the cover of the wastewater pump is loose.
1.
Clean the wastewater pump.
→
"Clean wastewater pump", Page 54
2.
Secure the cover of the wastewater pump so it
clicks into position.
→
"Clean wastewater pump", Page 54
E:90-01 will light up
alternately.
Mains voltage is too low.
This is not a fault on the appliance.
1.
Contact an electrician.
2.
Have the mains voltage and electrical installation
checked by an electrician.
E:92-40 will light up
alternately.
Filters are soiled or blocked.
▶
Clean the filters.
→
Summary of Contents for Adorina V600
Page 1: ...Information for Use Adorina V600 Dishwasher...
Page 59: ......
