Washing Machine / Operating instructions
103 / EN
getting wrinkled when there is no water in the machine. Press Start / Pause button after this process
if you want to drain the water without spinning your laundry. Programme will resume and complete
after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun and the programme is completed.
If you want to discharge the water at the end of the programme without spinning, use
No Spin
function.
88:88
88
C
0
C
No change can be made in programmes where spin speed adjustment is not allowed.
You can change the spin speed after the washing starts if the washing steps allow it. Changes
cannot be made if the steps do not allow it.
6.8 Auxiliary function selection
Select the desired auxiliary functions before starting the programme. Whenever a programme is
selected, frames of the auxiliary function symbol that can be selected together with it illuminates.
And when you select an auxiliary function, the interior area of the auxiliary function symbol also
starts to illuminate.
1888
88:88
88
C
0
C
Frame of the auxiliary function symbol that cannot be selected with the current programme does not illuminate.
Also the frames of the auxiliary function suitable for the current programme after the washing
has started remains illuminated. You can select or cancel the auxiliary functions whose frames are
illuminated. If the wash cycle has reached a point where you cannot select the auxiliary function, the
function's frame turns off.
C
Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is
selected before starting the machine, the function selected first will be canceled and the second auxiliary
function selection will remain active. For example, if you want to select Quick Wash after you have selected the
Additional Water, Additional Water will be canceled and Quick Wash will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See, “Programme and
consumption table")
Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be
cancelled. The frame of the auxiliary function will not be illuminated, only inner area will be illuminated.
• Pre-wash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy,
water, detergent and time.
• Quick wash
This function can be used in Cottons and Synthetics programmes. It decreases the washing times
and also the number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine with half of the maximum laundry specified in the programme
table.
