V-ZUG AiroClearCabinet V200, Operating Instructions Manual

3 Operating the appliance

3 

Operating the appliance

3.1 

Operation

Switch extractor fan on/off

▸ Slide the switch 

6

 to power level   or  .

6

Run only briefly (a few minutes) at power level  , then switch to a lower power
level.

▸ To switch off, set the switch to 

.

We recommend switching the appliance on at level   some 5 minutes before start-
ing to cook. Leave the appliance running for about 15 minutes after cooking to ex-
tract the cooking smells.

Switching the illumination on/off

▸ Slide the switch 

7 

to the   position.

▸ To switch off, set the switch to 

.

7

4 

Care and maintenance

4.1 

Cleaning the housing

Take care that no water gets into the housing of the appliance! If water gets into
the housing, it can cause damage.

Do not use abrasive cleaners, scouring pads, steel wool, etc. for cleaning, as they
can damage the surface. Disconnect the appliance from the mains and unscrew
the fuse or switch off the automatic circuit breaker.

Cleaning the outside/inside

▸ Clean the outside of the appliance with a warm, damp cloth and a little detergent and

then wipe dry.

–

Grease and condensate water can build up on the inside around the metal grease
filters.

▸ Clean with a warm, damp cloth and a little detergent – you can also use a brush if ne-

cessary – and then wipe dry with a kitchen towel.

9