background image

5 Trouble-shooting

Trouble-shooting

This section lists faults that can be solved simply by following the instructions given. If
the fault cannot be remedied, please call Customer Services.
Before calling Customer Services: Please note down the serial number (for SN, see iden-
tification plate under «Technical data») and what led to the fault.

Malfunction

Possible cause

Solution

Appliance is not
working.

Interruption in the power
supply.

▸ Check the power supply.
▸ Change the fuse.
▸ Reset the automatic circuit

breaker.

Illumination is not
working.

LED light bulb is defective. ▸ Contact Customer Services.

Malfunction

Possible cause

Solution

Appliance is not ex-
tracting enough air.

Metal grease filters are
dirty.

▸ Clean metal grease filters.

Recirculation mode only:
Activated charcoal filters
are saturated.

▸ Clean and reactivate or replace

activated charcoal filters.

Extraction mode only: In-
sufficient fresh air intake.

▸ Ensure fresh air intake is suffi-

cient.

Accessories and spare parts

Please give product family of the appliance and exact designation of the accessory or
spare part when ordering parts. 

Metal grease filter (example is shown;
actual filter depends on model)

Remote control

15

Summary of Contents for AiroClearWall V4000

























Reviews: