5 Using the appliance
5.9
Timer
The timer functions like an egg timer. It can be used at any time and independently of all
other functions.
Setting and starting the timer
▸ Press the touch button.
–
A suggested value of «10min» appears in the display.
▸ Turn the adjusting knob and set the desired duration.
–
The duration and the end time for the timer appear in the display.
The timer can be set for:
▪
up to 10 minutes in 10-second intervals, e.g. = 9 minutes and 50 seconds;
▪
over 10 minutes in 1-minute intervals, e.g. = 1 hour and 12 minutes;
▪
over 10 hours in 1-hour intervals, e.g. = 18 hours.
The maximum timer duration is 99 hours.
▸ Press the adjusting knob to confirm.
–
The timer starts.
–
If there is no operating mode running with a set duration, the remaining time on the
timer will be displayed in the digital display.
–
The touch button is illuminated in white.
–
If the appliance was in another menu before the timer was set, e.g. operating
modes: the menu or the submenu selected within it, e.g. a running operating mode,
appears.
–
If the appliance was not in another menu: the display goes black.
Checking and changing
▸ Press the touch button.
–
The countdown to the time remaining appears in the display.
▸ Shorten or extend the time by turning the adjusting knob.
▸ Confirm this shortening or extending of the time.
When the timer finishes
When the set duration is up:
–
An acoustic signal is emitted.
–
«Timer finished» appears in the display.
▸ To close the message, select .
Switching the timer off before time
▸ Press the touch button.
–
The countdown to the time remaining appears in the display.
▸ Set the timer to 0 by turning the adjusting knob and confirm.
Or, if the timer is the only active function:
▸ Press the touch button.
Or, to switch off the appliance:
▸ Press the touch button 2×.
23
