13
Settings
Different settings (parameters) can be set for the appliance. This is described below
for both models.
A
Depress the «
SET
» settings key for about 3 seconds.
–
appears in the display (model 245).
–
appears in the displays (model 246).
A
Press the «
+
» or the «
–
» settings key to toggle between the parameters.
A
Press the «
SET
» settings key to select a parameter.
A
Use the «
+
» or «
–
» settings key to change the value.
A
Press the «
SET
» settings key to accept the value.
– The setting is saved.
A
To exit, depress the «
SET
» settings key for about 3 seconds.
Depending on the setting, only the relevant parameters that can be changed are
shown.
It is possible to exit the settings without saving if:
䡲
no settings key is pressed for one minute,
䡲
a coin is inserted,
䡲
or an appliance is selected (model 246).
Example: With the setting for token operation, the parameters
to
(CHF and EUR) are not visible.
All manuals and user guides at all-guides.com