background image

…  Settings

17

Model 246 (appliance 2)

Parameter

Function

Description

Operating mode 

appliance 2

For setting the operating mode to

time dependent (0) 

or usage dependent (1) operation

Unit for 

time-dependent operation 

appliance 2

Defines the length of time (e.g. 1 hour) 

during which the tariff in P33 is valid.

Tariff for 

time-dependent operation 

appliance 2

Charge for (e.g. 1 hour) washing/

drying according to time defined in P32.

Unit for 

usage-dependent operation 

appliance 2

Defines the length of time (e.g. 1 hour) 

during which the tariff in P35 is valid.

Tariff for 

usage-dependent operation 

appliance 2

Charge for (e.g. 1 hour) washing/

drying according to time defined in P34.

Current response threshold 

appliance 2

Changing the current response threshold determines the level of 

power consumption from which charging begins.

Power display 

appliance 2

Shows actual power consumption. This parameter cannot be 

changed. If a value greater than 1.0 A is measured, 

 

is displayed.

Shut-off delay time 

appliance 2

Depending on the washing machine or tumble dryer connected, 

there are pauses during a programme sequence (gaps in the power 
being drawn). As soon as there is a gap that is greater than the set 

shut-off delay time (end of programme), charging is ended.

All manuals and user guides at all-guides.com

Summary of Contents for Coin System 1

























Reviews: