11 Care and maintenance
Default value for soft roasting
The default value is the target temperature that is automatically set when soft roasting.
With this user setting, it can be increased or decreased by up to 4 °C; the setting then
applies for all cuts of meat.
Example: When using «Soft roasting seared» with a 2 °C increase in the default value, a
«medium» fillet of beef is cooked to a target temperature of 59 °C instead of 57 °C.
10.12
Childproof lock
The childproof lock is to prevent children accidentally switching on the appliance.
When the childproof lock is activated, the appliance can only be operated after first en-
tering a code. The code is displayed in reverse order when unlocking.
The childproof lock activates 3 minutes after the appliance is switched off.
10.13
Appliance information
Under
«Appliance information», you will find:
▪
The article number and serial number (FN) of your appliance
▪
The software versions of your appliance as well as the acoustic signals and back-
ground images currently being used (depending on model)
10.14
Demo mode
In demo mode, almost all the appliance functions are available but it is not possible to
cook with the appliance. This ensures operating safety during product demonstrations
and consultations.
It is only possible to switch demo mode on and off with a safety code.
10.15
Factory settings
If one or more user settings have been changed, these can be reset to the factory set-
tings.
11
Care and maintenance
Risk of burns from hot surfaces!
Allow the appliance and the accessories to cool down before cleaning them.
Damage to the appliance from incorrect treatment!
Do not use any abrasive or caustic cleaning agents, metal scrapers that are sharp
or scratch, steel wool, abrasive scouring pads, etc. These products will damage
the surfaces. Glass surfaces that are scratched can crack.
Never use a steam cleaner to clean the appliance.
11.1
Cleaning the exterior
▸ Remove any soiling or excess cleaning solution immediately.
▸ Clean the surfaces with a soft cloth dampened with water and a little washing-up liquid
– for metallic surfaces rub in the direction of the original polish lines.
▸ Wipe dry with a soft cloth.
36
