V-ZUG CookTop Teppan Yaki I40, Operating Instructions Manual

6 Care and maintenance

5.2 

Cancelling user settings

▸ Press the   button. 

–

Any changes made to the default values are not saved.

–

The «User settings» mode is ended.

6 

Care and maintenance

Clean the appliance only when it has completely cooled down.
Risk of burns!

Always clean the appliance after use. This prevents food residue from burning on. Dried-
on or burned-on food is harder to clean off. 
Use of improper cleaning techniques can result in damage to the markings or surface.
▸ Use only a soft cloth or sponge with water and a non-abrasive detergent suitable for

metal surfaces for cleaning everyday soiling. Always follow the detergent manufac-
turer’s instructions for use.

▸ Soften and remove crusty deposits when cool with the «OptiClean» programme.
▸ Remove limescale stains when cool with a small amount of limescale remover, e.g.

vinegar or lemon juice. Then wipe clean with a damp cloth.

Blue tarnish spots and condensate residue can be removed using a mildly acidic
cleaning agent or some lemon juice.

Cleaning the operating unit

Avoid cleaning the surface of the glass ceramic hob with abrasive cleaning agents,
scouring pads, wire wool, etc. This could damage the operating unit.

▸ Clean the operating unit using glass cleaner.

6.1 

OptiClean

This programme allows the frying surface to be covered with water and soaked at a tem-
perature of 70 °C for 10 minutes. This softens up crusty deposits, making them easier to
remove. 

Switching OptiClean on

▸ Pour 0.3 l water on to the frying area.
▸ Hold the 

 button depressed for 2 seconds.

–

A double acoustic signal is emitted.

–

 illuminates in the display.

–

The frying surface is heated up to 70 °C.

Deactivating at end of programme

–

After 10 minutes, an acoustic signal is emitted and the frying surface switches off.

–

 illuminates in the display for another 10 minutes.

▸ Soak up the water with a sponge and clean the surface with a suitable cleaning agent.

Switching OptiClean off before time

▸ Hold the 

 button depressed for 2 seconds.

–

A double acoustic signal is emitted.

–

The frying zones are switched off.

–

 flashes in the display.

15