V-ZUG CookTop Teppan Yaki I40, Operating Instructions Manual

7 Trouble-shooting

7 

Trouble-shooting

You may be able to trouble-shoot the following errors yourself. If not, note down the error
message in full (message and E numbers) and then call Customer Services or report it
to us online.

7.1 

Error messages

Display

Possible cause

Solution

 illuminates

▪

The childproof lock is
activated.

▸ See how to operate appliance

with childproof lock activated.

▸ Switch the childproof lock off

(see page 13).

A continuous acoustic
signal is emitted, 
flashes and the appli-
ance switches off

▪

A button or a slider was
touched for longer than
10 seconds.

▪

Object (e.g. pan, dish)
on the control panel.

▪

Food boiled over on to
the control panel.

▸ Remove object or food that has

boiled over.

▸ The appliance can be used

again as normal.

 flashes

▪

The excess temperat-
ure protection of a fry-
ing zone has been
triggered.

▸ Allow the frying zone to cool

down.

▸ Continue cooking on a different

frying zone.

 flashes

▪

An interruption in the
power supply.

▸ Touch any button to acknow-

ledge the display.

▸ The appliance can be used

again as normal.

   or   and a num-

ber illuminate

▪

Internal error occurred. ▸ Note down the error number.

▸ Note down the serial number

(SN) of the appliance. See the
identification plate for this.

▸ Call Customer Services.

 and   illuminate

▪

An object (e.g. paper)
underneath the hob is
obstructing the air in-
take.

▸ Remove any objects in the

drawer underneath the teppan
yaki.

▸ Touch any button to acknow-

ledge the error.

▸ After 10 minutes the appliance

can be used again as normal.

▪

Ventilation is defective. ▸ Note down the error number.

▸ Note down the serial number

(SN) of the appliance. See the
identification plate for this.

▸ Call Customer Services.

16