V-ZUG CookTop Teppan Yaki I40, Operating Instructions Manual

4 Operating the appliance

4.6 

Bridging function

The bridging function allows two individual cooking zones lying one behind the other to
be switched on together and to be adjusted together. 

Switching the bridging function on

▸ Touch both sliders at the same time.

–

 Illuminates next to the slider.

▸ Set the desired temperature.

If, when the bridging function is switched on, a cooking zone is already running,
the power level and operating time of this cooking zone will be taken over for both
zones. If both frying zones are already running, they are switched off, the operating
times are cleared and 

 flashes in the power level displays.

Switching the bridging function off

▸ Touch both sliders at the same time.

–

Both cooking zones revert to the previous settings.

–

Each cooking zone can be regulated individually again.

4.7 

Multi-function button

Use the 

 button to set a preselected temperature. 

Switching on the temperature selector for meat

▸ Touch the 

 button 1×.

–

The 

 symbol illuminates.

Switching on the temperature selector for vegetables

▸ Touch the 

 button 2×.

–

The 

 symbol illuminates.

Switching on the temperature selector for fish

▸ Touch the 

 button 3×.

–

The 

 symbol illuminates.

Switching off temperature selector

▸ Use the slider 

 to set any power level or switch off with« » .

4.8 

Pause cooking

With this function, all frying zones that are switched on can be temporarily reduced to
70 °C for up to 10 minutes.
After pause cooking, operation can be resumed using the previous settings. 
▸ Touch the   button.

–

The indicator light for the   button illuminates.

–

The temperature of the frying zone switched on changes to 70 °C.

–

The operating time is interrupted.

–

The timer continues to run.

–

All buttons are inactive except for  ,   and 

.

If the pause cooking function is not turned off within 10 minutes, the appliance
switches off completely.

10