V-ZUG CookTop Teppan Yaki I40, Operating Instructions Manual

5 User settings

5 

User settings

The following user settings can be set and saved individually:

User setting

Setting value

Factory

setting

P0

Acoustic signal loudness

0

Low

2

1

Medium

2

High

P1

Acoustic signal at end of

operating time / timer

0

No acoustic signal

2

1

Automatically off after 10 seconds

2

Automatically off after 1 minute

P4

Recommended value 

operating time / timer

0

Default time 0 minutes

3

1–9 Adjustable in steps from 10–90 minutes

P5*

Acoustic signal when 

buttons are pressed

0

Acoustic signal off

1

1

Acoustic signal on

P6

Restore factory settings

0

To restore factory settings: Hold the 
button depressed for 2 seconds.

–

* When the operating time or timer is up or when error messages appear, an acoustic
signal is emitted at the level of loudness set in P0.

5.1 

Changing user settings

▸ With the teppan yaki switched off, simultaneously hold the 

 and 

 buttons de-

pressed for 3 seconds.

–

An acoustic signal is emitted.

▸ Touch both sliders at the same time.

–

An acoustic signal is emitted.

–

The user setting, e.g. 

, appears in display 

3

.

–

The current user setting value is shown in display 

2

.

1

2

3

▸ Use the 

 button to select the next highest and the 

 button the next lowest user

setting.

▸ Touch or swipe slider 

1

 to select a higher or lower setting value.

▸ To save entries: Hold the   button depressed for 2 seconds.

–

An acoustic signal is emitted.

–

The «User settings» mode is ended.

14