V-ZUG CookTop V2000 I604, Operating Instructions Manual

4 Operating the appliance

4.7 

Automatic boost

Do not leave the hob unattended when using the automatic boost. Risk of food
boiling over, burning on and igniting!

All the cooking zones are equipped with a selectable automatic boost. With this function,
a cooking zone heats at power level «9» for a certain length of time (see table). Then it
automatically switches back to the power level set. 

The automatic boost function must be activated anew each time a cooking zone is
switched on.

Power level

Automatic boost in mins.:secs.

0:40 01:15 02:00 03:00 04:15 07:15 02:00 03:15

Switching the automatic boost on

▸ Press the   button of the required cooking zone.
▸ Press the required power level on the slider for 3 seconds.

–

As long as the automatic boost is active,   and the power level are illuminated al-
ternately in the display.

–

After the boost time has ended, the heat output is reduced to the selected power
level again.

Switching the automatic boost off before time

▸ Press the   button of the required cooking zone.
▸ Set a lower power level using the slider.

4.8 

Operating time

Do not leave the hob unattended during use. Risk of boiling over, burning on and
igniting! 

With the operating time function, a Cooking zone switches off automatically after a set
time 1 – 99 mins.

Setting the operating time

▸ Select the required cooking zone.
▸ Touch the   button for the required cooking zone.
▸ Touch or swipe the slider to set the power level.
▸ Touch the 

 button.

–

 flashes in the display for 10 seconds.

–

The indicator light for the cooking zone flashes.

–

The 

 symbol illuminates.

▸ Use the 

 slider to set the units digit of the operating time.

▸ Touch the 

 button and save the units digit.

▸ Use the 

 slider to set the tens digit of the operating time.

▸ Touch the 

 button and save the tens digit.

To quickly change the operating time, press and hold the   or   button. 
Touch the 

 button again to set the first digit of the operating time.

–

When the   button is pressed for 1 second, the duration is set to 

 and an

acoustic signal is emitted for as long as the button is pressed.

–

The operating time starts 10 seconds after last pressing a button.

14