background image

8 Trouble-shooting

7.1 

Cleaning agent

Glass ceramic with OptiGlass

Unsuitable cleaning agents may attack and damage the coating.

▸ Only use the cleaning agents and methods for glass ceramic

with OptiGlass that we recommend (see page 10).

Trouble-shooting

You may be able to trouble-shoot the following errors yourself. If not, note down the error
message in full (message and E numbers) and then call Customer Services or report it
to us online.

8.1 

Error messages

Display

Possible cause

Solution

 flashes alternately

with the power level

Cookware is not suitable for
use with induction hobs.

▸ Use suitable magnetic

cookware (see page 9).

Cookware is not standing on
the cooking zone.

Cookware is too small for the
cooking zone selected.

▸ Ensure cookware corres-

ponds to the size of the
cooking zone.

 illuminates

The childproof lock is activ-
ated.

▸ Switch the childproof lock

off (see page 16).

A continuous acoustic
signal is emitted, 
flashes and the cook-
ing zone switches off

A button or a slider was
touched for longer than
10 seconds.

Object (e.g. pan, dish) on the
control panel.

Food boiled over on to the
control panel.

▸ Remove object or food

that has boiled over.

▸ The appliance can be

used again as normal.

 flashes

The excess temperature pro-
tection of a cooking zone
was triggered.

▸ Allow the cooking zone to

cool down.

▸ Continue cooking on a dif-

ferent cooking zone.

▸ Check cookware.

 flashes

An interruption in the power
supply.

▸ Touch any button to ac-

knowledge the display.

▸ The appliance can be

used again as normal.

21

Summary of Contents for CookTopInduction V6000





























Reviews: