5 OptiLink
▸ Touch the
button again.
–
A double acoustic signal is emitted.
–
The childproof lock is now switched off.
4.15
Restore function
If the appliance has been inadvertently switched off with the button, the settings that
were being used can be restored within 6 seconds.
▸ Switch the appliance on.
–
The indicator light for the
button flashes for 5 seconds.
▸ While the indicator light is flashing, touch the
button.
4.16
Pause cooking
After pause cooking, operation can be resumed using the previous settings.
▸ Hold the
button depressed for 5 seconds.
–
The display illuminates.
–
The power level of the cooking zone that is switched on changes to .
–
The operating time is interrupted.
–
The timer continues to run.
–
All buttons are inactive except for and
.
▸ Touch the
button again to resume cooking.
If the pause cooking function is not turned off within 10 minutes, the appliance
switches off completely.
4.17
Wipe protection
This function prevents the power level from being changed accidentally, for instance
when wiping the control panel with a cloth.
▸ Touch the
button.
–
The indicator light for the
button illuminates.
▸ Wipe protection is switched off by pressing the
button again or automatically after
30 seconds.
Touch the button to switch the appliance off at any time.
5
OptiLink
5.1
Connecting the hob to the range hood
The hob can only be connected to a range hood with the OptiLink function.
To activate the connecting mode on the hob:
▸ Switch the hob off.
▸ Access the user setting (see page 19).
▸ Select the
user setting.
▸ Select the setting by touching or swiping slider 1; no further action is to be taken.
–
and the setting illuminate in the displays.
To activate the connecting mode on the range hood:
–
Make the settings as described in the operating instructions for the range hood.
17
