background image

1  Safety precautions

5

1.2

Correct use

• The appliance is designed for use in the home for extracting cooking fumes 

and smells from above the cooking surface.

• Any repairs, modifications or manipulations to the appliance, especially 

any electrically live parts, should only be carried out by the manufacturer, 
its Customer Services or similarly qualified persons. Repairs if carried out 
incorrectly may cause serious injury, damage to the appliance and fittings, 
as well as affect the functioning of the appliance. If the appliance is not 
working properly or in case of a repair order, follow the instructions given 
in the 

Repair service

 section. Please contact our Customer Services if 

necessary.

• Use original spare parts only.

• Retain these operating instructions for future reference. If you sell or pass 

the appliance on to a third party, please ensure these operating instruc-
tions, together with the installation instructions, accompany the appliance. 
In this way, the new owner can inform themselves about how to use the 
appliance correctly and read the pertinent safety precautions.

 

1.3

Children in the home

• Packaging material e.g. plastic and polystyrene can be dangerous for 

children. Danger of suffocation! Please keep packaging material away from 
children.

• The appliance is designed for use by adults who are familiar with these 

operating instructions. Children are often unable to recognise the danger 
of electrical appliances. Ensure proper supervision and do not allow 
children to play with the appliance – there is a danger that children could 
hurt themselves.

 

Summary of Contents for DFN 5





























Reviews: