V-ZUG DFPQ5, Operating Instructions Manual

3 Operating the appliance

Select one of four power levels by pushing the glass canopy in and out at about 1-
second intervals. Make sure to push the glass canopy as far back as it will go until
it hits the mechanical stop.

3.4 

Illumination

▸ Touch the 

 button.

–

The illumination comes on.

▸ Touch the 

 button again.

–

The illumination switches off.

Setting the colour temperature

▸ When the illumination is activated: Hold the 

 button until the desired colour temper-

ature is reached.

–

The colour temperature selected will be automatically accepted.

3.5 

After-running time

The purpose of the after-running time function is to remove any lingering smells. Depend-
ing on the default setting, the appliance continues to run at the power level set for 5–20
minutes and then switches off automatically. 
▸ Touch the 

 button.

–

The appliance switches on at power level 1 and the illumination is activated.

▸ Press the 

 button repeatedly until the desired power level is displayed.

▸ Touch the 

 button to activate the after-running time function.

–

The after-running time starts and after it is finished (see table) the illumination and
appliance switch off.

–

While the after-running time is activated, the 

 display symbol and the correspond-

ing power level illuminate.

▸ To end the after-running time before time: Touch the 

 button.

–

This switches the appliance and the illumination off.

Power level

After-running time in minutes

20

15

10

 (flashing)

5

We recommend switching the appliance on at level 2 some 5 minutes before start-
ing to cook. Leave the appliance running for a few minutes after cooking so as to
extract all the cooking smells.

12