V-ZUG DFPQ5, Operating Instructions Manual

3 Operating the appliance

3.6 

Wipe protection

The wipe protection function temporarily deactivates the keypad / control panel and is
useful for quickly cleaning the operating elements.
▸ Switch the appliance and the illumination off.
▸ Hold the 

 button depressed for 5 seconds.

–

The wipe protection function is activated, the appliance switches off temporarily and
the 

 display symbol illuminates.

–

The wipe protection function turns off after 30 seconds and the 

 symbol is no

longer displayed.

3.7 

Saturation indicators

Metal grease filters

The 

 symbol in the display flashes after 20 operating hours. The saturation level has

been reached and the metal grease filters must be cleaned.

Activated charcoal filter (recirculation mode only)

The 

 symbol in the display flashes after 120, 180 or 240 operating hours, depending

on the default cleaning interval setting. For more details, see: Using for the first time (see
page 10). The saturation level has been reached. The activated charcoal filter has to be
cleaned and regenerated or replaced. Metal grease filters have also to be cleaned.

Reset the saturation indicator after cleaning.

▸ Switch the appliance and the illumination off.
▸ Hold the 

 button depressed for 5 seconds.

–

The 

 or 

 symbols in the display go out.

Only activate the saturation indicator for the activated charcoal filter if the appli-
ance is being used in the recirculation mode. For more details, see: Using for the
first time (see page 10).

3.8 

Remote control (accessories)

This appliance can be controlled remotely (remote control is not included in the scope of
delivery, but is available for order as an accessory).

Decrease power level

Increase power level

Activate after-running time

Switch illumination on/off

Do not place the remote control near any heat sources.
Dispose of the batteries at a suitable recycling point in accordance with national
regulations.

13