… Use
15
Saturation indicator
Saturation indicator for metal grease filters, combi filters and the long-life
activated charcoal filter
The indicator light
flashes after 40 operating hours. The saturation level
is reached, the grease filters have to be cleaned.
Saturation indicator for the standard-activated charcoal filter
The indicator light flashes after 160 operating hours. The saturation level
is reached, the standard-activated charcoal filter needs to be replaced.
To activate the saturation indicator
A
Depress the
and
buttons at the same time for 3 seconds.
– The indicator light
flashes.
– After 3 seconds the indicator light flashes. The saturation indicator is
activated.
To deactivate the saturation indicator
A
Depress the
and
buttons at the same time again.
– After 3 seconds the indicator light goes out. The saturation indicator is
deactivated.
The saturation indicator is deactivated at the factory. If the appliance
is being used as a recirculation model, the saturation indicator must
Summary of Contents for DW-SM9
Page 1: ...Range hood DW SM9 Operating instructions V ZUG Ltd...
Page 27: ...27 Notes...
Page 28: ...Notes 28...