… Care and maintenance
18
Removing the metal grease filters and the combi filters
A
Loosen the fastening screw
1
in the
combi filter in the middle.
A
With the other hand, fold the combi
filter downwards.
A
Remove the combi filter from out of
the profile slot.
A
Remove the left and right combi fil-
ters in the same way.
A
On the metal grease filter push the
grip
2
back.
A
Carefully pull the metal grease filter
down and out of the holder.
Replacing the metal grease filters and the combi filters
A
Replace the metal grease filters.
A
Put the right combi filter in the profitle slot at the back and fold upwards.
Tighten the fastening screw
1
slightly.
A
Install the left and the middle combi filters in the same way.
A
Depress the
button for at least 3 seconds.
– An acoustic signal is given off.
– The indicator light
goes out.
Take care not to damage the grease filters.
2
1
Summary of Contents for DW-SM9
Page 1: ...Range hood DW SM9 Operating instructions V ZUG Ltd...
Page 27: ...27 Notes...
Page 28: ...Notes 28...
