… Care and maintenance
21
A
Remove and clean the metal grease filters.
A
Turn both knobs 90 ° and remove the long-life
activated charcoal filter from the bottom.
A
Remove, clean, reactivate and replace the filter
1
into the frame
2
. Take care not to damage the
filter. If necessary, replace the used long-life acti-
vated charcoal filter by a new one.
A
Replace the long-life activated charcoal filter and
engage it at the back and secure at the front with
the knobs.
A
Replace the metal grease filters.
A
Replace the fuse, switch the circuit breaker back
on again.
A
Depress the
button for at least 3 seconds.
– An acoustic signal is given off.
– The indicator light
goes out.
1
2
Summary of Contents for DW-SM9
Page 1: ...Range hood DW SM9 Operating instructions V ZUG Ltd...
Page 27: ...27 Notes...
Page 28: ...Notes 28...
