… Use
23
Operating time
With the operating time function, the cooking zone switches off automatically
after a set time (between1 and 99 minutes). This function can be used with
all the cooking zones, though not at the same time.
Setting the operating time
The required cooking zone must be switched on.
A
Press the
touch button for operating time 1×.
–
appears in the display.
– The 4 indicator lights for the cooking zones flash.
Alternatively
A
Press the
touch button for operating time 1×.
–
appears in the display.
– The 4 indicators lights for the cooking zones flash.
A
Press the
or
touch button again to set the required operating time.
– Hold the touch button depressed to incrementally change the duration.
As long as the indicator lights are flashing, the operating time can be
assigned to any of the cooking zones.
A
Press the
or
touch button for the required cooking zone.
– This will not change the power level set.
– The indicator light illuminates for the relevant cooking zone.
– The power level and operating time can be changed later.
– When the operating time is up, the relevant cooking zone switches off.
–
flashes in the display and an acoustic signal is emitted for
1 minute.
A
Press any touch button to turn the acoustic signal off.
Do not leave the hob unattended during the operating time. Risk of
boiling over, burning and igniting!
