10 Trouble-shooting
Malfunction
Possible cause
Solution/Measures
Illumination is flashing
and an acoustic signal
is emitted.
▪
Appliance door is left
open for longer than 10
minutes.
▪
Appliance door was not
closed properly.
▸ Close the appliance door.
Malfunction
Possible cause
Solution/Measures
Error display
▪
Temperature sensor in the
refrigerator compartment is
defective.
▸ Contact Customer Services.
–
The appliance switches to the
emergency mode.
Error display
▪
Various situations can lead
to an «F» message.
▸ Contact Customer Services.
Malfunction
Possible cause
Solution/Measures
Temperature display
is flashing and an
acoustic signal is
emitted.
▪
The refrigerator compart-
ment temperature is 10 °C
higher than the set temper-
ature.
▸ Do not place warm foods right
next to the temperature sensor.
▸ If there is no warm food in the
appliance: Contact Customer
Services.
▪
There has been a power
failure. The flashing tem-
perature display shows the
temperature when the ap-
pliance is put back into
service.
▸ Touch any button.
–
The set temperature is shown
in the temperature display.
▸ Check any refrigerated or frozen
food and discard if spoiled.
▪
The frequent appearance
of warnings indicates a
technical problem.
▸ Contact Customer Services.
21
