V-ZUG Noblesse, Operating Instructions Manual

12 Technical data

Malfunction

Possible cause

Solution

A temperature dis-
play flashes.

▪

The cooling compartment
temperature is 10 °C
higher than the set temper-
ature or the freezer com-
partment temperature is
above -9 °C.

▸ Do not place warm foods right

next to the temperature sensor.

▸ If there is no warm food in the

appliance: call Customer Ser-
vices.

▪

There has been a power
failure. The flashing tem-
perature displays show the
temperature when the ap-
pliance is put back into
service.

▸ Touch any button.

–

The set temperature is shown
in the temperature display.

▸ Check any refrigerated or frozen

food and discard if spoiled.

Malfunction

Possible cause

Solution

Error display 

▪

Temperature sensor in the
freezer compartment is de-
fective.

▸ Call Customer Services.

–

The appliance enters emer-
gency mode. The freezer com-
partment is cooled at the same
output level as before the tem-
perature sensor malfunction.

12 

Technical data

External dimensions

▸ See installation instructions

Electrical connection

▸ See identification plate 
The identification plate is located to the left of the vegetable drawer.

12.1 

Temperature measurement

The refrigerator and freezer compartment temperature are measured in accordance with
an internationally recognized standard. Own measurements can be imprecise and are
not suitable for checking the accuracy of the temperature.

12.2 

Note for testing institutes

To freeze the maximum quantity (see identification plate), the goods must be placed in

the middle of the freezer compartment. The special function 

 must be activated imme-

diately before putting the food in the freezer.

21