5 Special functions
Setting the temperature in the cooling compartment
The temperature can be set between °C and °C.
When the refrigerator compartment temperature is 5 °C, the temperature of the freezer
zone is about -18 °C.
▸ Depress the
button for 3 seconds.
–
The cooling compartment temperature display flashes in the display.
▸ Touch the
button repeatedly until the desired temperature flashes.
–
If no further settings are made after 5 seconds, the temperature set is accepted
and the temperature display stops flashing.
–
The set temperature will be reached after a few hours.
The effective temperature may at times be different from the selected set value if
the door is open for an extended period of time or if warm foods have been
placed inside.
If the
button is pressed without having pressed the
button beforehand, a
double acoustic signal is emitted.
Switching the appliance off
▸ Hold the button depressed for 3 seconds.
–
The appliance switches off.
–
«off» is shown in the digital display for 30 seconds.
–
«off» is shown in the digital display for 30 seconds when the appliance door is
opened or a button is pressed.
If the appliance is being taken out of operation, e.g. for repair work or disposal:
▸ Remove the mains plug from the mains socket.
▸ When not in use for an extended period of time: Clear out, defrost and clean the appli-
ance, and leave the cooling compartment door and freezer compartment door open.
5
Special functions
Switching the special function on
Special function
Symbol
Remarks
▸ Depress the
but-
ton for 3 seconds.
Fast cooling
next to the cool-
ing compartment
temperature display
▸ Press the
button
again
Sabbath mode
on the cooling
compartment temper-
ature display
is illuminated for
30 seconds after ac-
tivation.
–
The corresponding symbol flashes in the display.
▸ Press the
button.
–
The special function is activated.
–
The corresponding symbol is illuminated in the display.
10
