4 Programme overview
Timed drying
▪
The programme duration can be set to between 30 and 120 minutes.
▪
No other programme settings can be made if the Timed drying programme is selec-
ted.
Delayed start
▪
Take advantage of cheap-rate electricity.
▪
Programme the start or end – so that, for instance, the textiles are ready to put on in
the morning without the appliance having to run all night.
▪
During shut-off periods – determined by the local electricity supplier – the delayed
start time is extended by the length of time the electricity was shut off. This is not
shown in the display.
4.3
Extra programme «Hygiene»
In the extra programme «Hygiene», the clothing is freed of germs using heat and mois-
ture. The running time of about three hours increases the sterilising effect.
The extra programme «Hygiene» has 3 phases:
Hygiene
The heater increases the circulating air temperature and the washing is dampened using
steam, which accelerates the sterilising of the clothes. In addition, the air is cleaning by
photocatalysis. Once the washing has been refreshed, the «Drying» phase begins.
Drying
The washing is dried by the heat pump. The drying programme is monitored by a mois-
ture and temperature sensor. As soon as the required level of dryness is reached, the
«Cool down / Airing» phase starts.
Cool down / Airing
When the «Drying» phase finishes, the washing is cooled down and aired for at least
30 minutes.
Select the
«Easy care» programme setting for delicate textiles.
The following diagram gives an overview of the programme settings in the extra pro-
gramme «Hygiene».
Easy care
Delayed start
* Factory setting
Yes
No *
Easy care
▪
Very gentle programme with reduced temperature.
▪
Particularly suitable for fine textiles, canvas shoes, trainers and functional clothing
(e.g. Gore-Tex).
15
Summary of Contents for RefreshButler V6000
Page 1: ...Operating instructions RefreshButler V6000 Textile care system...
Page 41: ...41 13 Notes...
Page 42: ...42...
