5 Washing
35
With «Stop after rinsing»
The washing remains lying in the water after the final rinse. The water must
be drained off before the washing can be unloaded.
➤
Press the
button 1×.
– The washing is spun at the speed set for the programme selected.
➤
Press the
button 2×.
– Draining without spinning.
With display
It is common nowadays to select programmes with temperatures below
60 °C in order to save energy. These achieve perfectly good results with
lightly soiled everyday washing. Washing almost exclusively with low temper-
atures will result in the formation of foul smelling coatings in the appliance.
To avoid this a «hygiene recommendation» appears when the performance
of one of the following steps is recommended for hygiene reasons:
➤
With one of the next wash cycles carry out a wash with at least 60 °C.
Or
➤
Remove washing.
➤
Press the
button 1×.
– The programme «appliance hygiene» starts.
5.6
End of the wash day
➤
Clean the detergent dispenser drawer if
necessary.
➤
After finishing washing for the day, remove
any deposits or foreign bodies from out of the
door seal.
➤
Push the appliance door to, but do not close.
– This allows the washing drum and the door
seal to dry.
Summary of Contents for Unimatic S 287
Page 1: ...Washing machine Unimatic S Operating instructions V ZUG Ltd...
Page 62: ...62 12 Notes...
Page 63: ...12 Notes 63...
