7 Trouble-shooting
42
…
and
appear alternately in the digital display
…
appears in the digital display
…
appears in the digital display
Possible cause
Solution
• Faulty electrical
connection.
• Over-voltage
➤
If fault appears, note down the full error
message and the serial number, then
interrupt the electricity supply.
➤
Inform caretaker, owner of the appliance or
property management.
Possible cause
Solution
• The childproof lock is
switched on.
➤
See how to operate appliance with
childproof lock activated.
➤
Turn off childproof lock.
Possible cause
Solution
• If there is very heavy
foaming during the wash
cycle, the programme is
automatically extended
by an additional rinsing
cycle. This improves the
wash results, but also
increases the duration
of the programme.
➤
Reduce the amount of washing detergent
used next time.
➤
Adjust the amount of washing detergent
used to the water hardness.
Summary of Contents for Unimatic S 287
Page 1: ...Washing machine Unimatic S Operating instructions V ZUG Ltd...
Page 62: ...62 12 Notes...
Page 63: ...12 Notes 63...