8 Care and maintenance
8.2
Cleaning
Outside
▸ Remove any soiling or excess cleaning agent immediately.
▸ Clean the surfaces with a soft cloth dampened with water and a little washing-up liquid
– for metallic surfaces rub in the direction of the original polish lines.
▸ Dry with a soft cloth.
Inside
▸ Remove the sealing bar
1
incl. sealing bar cover
2
from the appliance.
▸ Remove any soiling or excess cleaning agent immediately.
▸ Clean the surfaces with a soft cloth dampened with water and a little washing-up li-
quid – for metallic surfaces rub in the direction of the original polish lines.
▸ Dry with a soft cloth.
▸ Clean the sealing bar
1
with a soft cloth dampened with water and a little washing-up
liquid and dry with a soft cloth. The sealing bar cover
2
can be cleaned in the dish-
washer.
▸ Put the sealing bar cover
2
back in
place in the appliance.
▸ Position the sealing bar
1
on the two
locating pins in the appliance.
1
2
Appliance lid gasket
▸ Clean the appliance lid gasket with a soft cloth dampened with water.
Do not use detergent!
▸ Dry with a soft cloth.
Parts used in external vacuuming
Clean the parts used in external vacuuming (suction inlet adapter, tube, adapter for va-
cuum stopper and vacuum stopper) with hot water, a little washing-up liquid and a soft
cloth or sponge and then wipe dry.
Accessories
The bag tray can be cleaned in the dishwasher.
18
Summary of Contents for VacuDrawer V6000
Page 1: ...Operating instructions VacuDrawer V6000 Vacuum drawers...
Page 28: ...28 15 Notes...
Page 29: ...29...
Page 30: ...30...
