3.Installation and de-installation
01) Please pull the right sided main
power switch (7) in position “ON”
02) Connect the device to external
power-supply (11) (e.g. car charger) in order
to fully charge the integrated battery (status
LED at front side of the device will change to
GREEN).
03) Insert the memory card (1) (with label up
sided and contact in front) until the card is
locked in place. Avoid any dirt or scratches on
the contacts of the memory card. Then press
the power button (3) in the front of the device.
04) Connect you device to the cradle.
04) Connect your device to the car mount by
slipping the 4-prongs of the car-mount to the
4-holes on the back of the device. Push the
mount up until you will hear a “CLICK” and
the prongs are tightened connected to the
device.
06) Press the holder against a flat part of your
windscreen/Flat Platform and press the lever
down to create a vacuum at the suction cup.
Be aware that the windscreen must be free of
any dirt.
07) Afterwards the holder is hold tightly
at your windscreen/Flat Platform now.
08) To release the holder, just push the lever
upwards...
09) ... and also pull the flap upwards to
destroy the vacuum under the suction cup.