***READ ALL INSTRUCTIONS BEFORE USE***
1. Insert the grounded Power Supply Cord into a grounded outlet.
2. Start your Vac N Blo by pushing the Toggle Switch from right to left.
3. When using the Hose (B), connect to the suction end to vacuum, and to
the exhaust end for blowing.
4. The Extension Wands (I) connect to the Hose (B) to reach those
inaccessible places. Eliminate bending to reach low areas and under
furniture, and stretching to reach high places.
5. The Crevice Tool (C) allows you to clean those hard to reach places. It
can be used for vacuuming and blowing.
6. The Dust Brush (C) gently loosens dust with its long, soft bristles. Great
for furniture, lamp shades, blinds, books, window sills, etc.
7. The Pik-All Nozzle (F) is great for stairs, upholstery, draperies,
mattresses, auto and boat interiors, and much more.
8. The Air Concentrator (D) maximizes and concentrates air flow for both
vacuuming and blowing purposes.
9. The Mini Attachment Kit (J) makes detailing those tiny places that were
previously inaccessible with standard vacuum cleaner attachments.
10. The 9 in. Swivel Floor Brush (H) is great for cleaning garage floors.
TO USE AS A BLOWER: RELEASE CLAMPS AND REMOVE FRONT
END CAP AND REMOVE CLOTH BAG. The Blower feature on the Vac
N Blo will certainly clear water from side view mirrors, door jambs, seams,
and other hard to reach areas.
To maximize the blowing power, remove the front end cap (where the bag is
kept), remove the bag, and leave the unit wide open. Operate the unit
without the end cap on and the Foam Filter in.
TO USE AS AN INFLATOR: When inflating air mattresses, boats, or
anything with a large valve, place the exhaust/blowing end into or against
the valve until the inflatable is filled.
When inflating small valve inflatables, place the tapered Inflatable Adaptor
(G) onto the exhaust/blowing end, and snap on to the “Push Button” locking
device. When flexibility is needed, attach the flexible hose to the
exhaust/blowing end.
