03
02
Only professional technicians or maintenance personnel for after-sales
support can disassemble and assemble the biomedical freezer. Otherwise, it
Please use the special power supply indicated on the nameplate of the
If the applied voltage is lower than 198V or higher than 242V, an automatic
voltage stabilizer of more than 4000W suitable for motor load needs to be
installed for assistance.
The power cord of this biomedical freezer is equipped with a three-prong
(grounded) plug to mate with a standard three-prong (grounded) outlet of
10A. Do not cut or remove the grounding pin of the power cord under any
circumstances. Make sure that the power plug and the outlet are connected
When the plug is removed from the power socket, it shall be held tightly, and
the wire of the plug shall not be pulled. If the wire is pulled, electric shock or
If the biomedical freezer is not operating properly, unplug the power plug.
Continued operation under abnormal conditions may cause electric shock or
Before any repair or maintenance of the biomedical freezer, always
disconnect the biomedical freezer from the power supply to prevent electric
shocks or personal injuries.
Make sure that the drugs or suspended particles inside and around the
biomedical freezer will not be inhaled during repairs and maintenance,
otherwise it may cause harm to human health.
When storing toxic, harmful, or radioactive substances, please use the
biomedical freezer in a safe area. Improper use may cause harm to health or
the environment.
Disconnect the power plug when the biomedical freezer is not in use for a
the deterioration of the power cord.
If the biomedical freezer is to be stored unused in an unsupervised area for
a long period, ensure that children do not have access to the biomedical
freezer. The disposal of the biomedical freezer shall be accomplished by the
appropriate personnel. Doors shall be removed to prevent accidents such as
If CO /LN standby system is used, a good ventilation environment must
2
2
be provided at the installation and use site. Increased carbon dioxide
concentrations in the air can asphyxiate and endanger life safety. In case
of poor ventilation, other methods must be considered to ensure a safe
environment.
Safety Precautions
Dear
Vacc-Safe
users:
We appreciate your trust. Thank you for using
Vacc-Safe
biomedical freezer. Please
carefully read the following information to better understand the Operating
Instructions and use this product, so as to prevent personal injury and damage to
items.
Safety warning signs
Warning
Warning hands
pinching!
Electrocution
hazard!
Combustible
material!
Safety Precautions
Document review is required in all
cases marked with
to clarify the
nature of potential hazards and the
countermeasures that must be taken.
WARNING
Ignoring WARNING items may result in
serious casualties.
Acts or operations that must
be prohibited
CAUTION
Ignoring CAUTION items may result in
casualties or damage to the biomedical
freezer and related properties.
Actions or operations that
must be followed
WARNING
Please use a power socket with a grounding wire to prevent electric shock.
If the power socket is not grounded, the grounding wire must be installed by
professional technicians.
proper care is taken to prevent overturning.
location, the biomedical freezer may fall down and cause injuries.
If the power cord needs to be extended, the cross-sectional area of the
2
extension cord shall not be less than 2.5mm and the length shall not be
gas leakage, and open the doors and windows to ventilate and exhaust gas.
Do not plug or unplug the power plug of the biomedical freezer, otherwise it
